Alpine KTP-445U Review [2022 Review]

Do you want a quick and easy solution to boost the power of your receiver? Alpine’s “Power Pack” amplifier boosts the power output of your receiver by four channels to 45 watts RMS.

That’s a significant increase over the normal vehicle radio’s7-20 watts per channel, and plenty of power to drive high-performance speakers or keep up with a powerful subwoofer amplifier.

Best of all, because this small amplifier is so efficient, it may often be powered by the same circuit as your receiver. You can feed a signal through RCA outputs or speaker-level wiring with a universalplug.

This small amplifier can be hidden behind most dashboards, but you’ll need 4-channel patch cables to connect your car sound to the preamp inputs. If you are interested in this model, keepreading our Alpine KTP-445U review for more information below.

Alpine KTP-445U Universal Power Pack Amplifier

Pros
  • Small size
  • Great sound
  • Low distortion, and low noise design
  • Can handle 2-ohm speakers
  • 4 channel outputs
Cons
  • No low-pass crossovers

About: This is a class D amplifier, and one of the advantages of this type of amp is its incredible size, which comes with high efficiency. It’s also lighter than other class D amplifiers,and the sound quality is good.

Sound Quality

It’s tough to get everything perfect when designing something so compact, but the producers got this amp right, focusing more on the sound and less on the less crucial parts according to this Alpine KTP-445Ureview.

See also  Best Single Din Touchscreen Head Unit [2022 Review]

Other automobile amplifiers can be irritating due to their high noise levels, particularly the background noise that can be heard while there is no music playing. Alpine has done an excellent jobof reducing the device’s noise in these scenarios.

You would assume a mediocre performance when you first plug it in, but after you start listening to it, you’ll be pleasantly surprised. According to the firm, they aimed to develop an extremely low noisefloor in order to provide an excellent listening experience.

Class D Amplifier

Class D audio amplifiers have become a popular topic in the audio industry in recent years, and there has been a trend involving them. It’s a cutting-edge technology that has undergone significantadvancements since its introduction to the market a few years ago.

However, many firms continue to create such amplifiers, and many of them leave a lot to be desired, but the Alpine KTP-445u is, fortunately, a fantastic model according to this Alpine KTP-445U review.

When it comes to automobile amplifiers, it’s important to understand that they’re all based on the same basic class, kind, or design. There are Class A models, which have the least distortion and producethe greatest sound, but they have a lot of power drainage and are the most expensive.

Then there are amplifiers that are classified as Class B, and so on. The amplifier is more powerful and better the closer the letter is to the beginning of the alphabet. Class A/B amplifiers were quite popularuntil recently since they were cost-effective, well-designed, and didn’t require a lot of power.

They were also a worthwhile investment because they could provide little distortion and high power levels according to this Alpine KTP-445U review.

See also  Tascam DR-05 vs DR-22WL [2022 Review]

Many of these amps, on the other hand, convert electrical power into heat rather than power to drive the speakers. The class D amplifier is a more recent technology that, while not as powerful in some circumstances,is more efficient.

These amps work by chopping up or modulating the audio signal and switching the transistors used in the process in a really quick manner according to this Alpine KTP-445U review.

As a result, the power efficiency is increased and there isn’t much heat produced in the process. While class A/B amplifiers have a maximum efficiency of 65%, class D amps come with around 90%efficiency. This results in no need for a huge and bulky body.

Installation

The size is wonderful since it can fit in exceedingly small locations that were unheard of just a few years ago. Some modern vehicles, for example, have extremely little room inside thedashboard, possibly beside or behind the current stereo.

It’s a fantastic answer to the most challenging installation issues that, in the past, would have necessitated either a significant increase in customer spending or, unfortunately, some people simply “givingup” because they didn’t have any other options.

It’s also a good fit for boats, but because it’s not marine rated, you’ll need to protect it from corrosion and exposure to the air and seawater according to this Alpine KTP-445U review.

You can either use the accompanying zip cable ties to link the little powerhouse to the nearest accessible wiring or use the included brackets and self-tapping screws to firmly mount it.

Remember that, because of its modest weight, you could also use double-sided adhesive tape or Velcro if you want according to thisAlpine KTP-445U review.

See also  Yamaha TSR-700 vs Denon AVR S750H [2022 Review]

Conclusion: Alpine KTP-445U Review [2022 Review]

Alpine has outdone themselves once again when it comes to getting the greatest power and sound out of a small package. It’s a fantastic upgrade for aftermarket or factory stereos that aren’t up to par accordingto this Alpine KTP-445U review.

It’s a terrific general-purpose 4-channel amp with a design that fits a wide range of installation and audio system needs. You’re willing to pay a few extra dollars for better sound anddesign, and you’ll get precisely that. You will not be dissatisfied. We hope you liked our Alpine KTP-445U review and it was helpful.

Scroll to Top