BM-800 Condenser Microphone [2023 Review]

In the age of the home studio, recording equipment has never been more inexpensive. However, because of this accessibility, navigating the seemingly infinite maze of alternatives has become virtually difficult. Choosing the perfect microphone may take up a whole afternoon if you are not an expert.

Look no further if you are searching for a low-cost, multipurpose microphone that can be used for a variety of purposes. The BM-800 is about the best value for money you can get for a good condenser mic.

If you are interested in this model, keep reading our BM-800 Condenser Microphone review for more information below. Hopefully, this BM-800 Condenser Microphone review will make that tedious procedure a bit less painful.

BM-800 Condenser Microphone

The BM-800, being a condenser mic, can capture more information and ambient ambiance at lower levels than any dynamic mic. BM-800 is an excellent microphone for those with a restricted budget. It works fine without a pre-amp, but with one, the results would be even better.

Simple to use and set up

There is not much technical knowledge needed to work around with the microphone. Setting up the microphone is simple and takes no more than a few minutes to complete according to this BM-800 Condenser Microphone review.

The usage of a Phantom Power to power the BM 800 condenser microphone is strongly recommended. As a consequence, you will be able to capture audio without needing to boost the input gain when recording, which will decrease background noise and result in much better audio.

Noise Reduction

The microphone features an excellent noise cancellation system that eliminates any background noise in your studio. You will also receive the pop filter, which gives it a more natural look. The microphone’s steadiness is great because it does not create a lot of self-noise.

Stability

The microphone is extremely sturdy and produces no self-noise when used with a stand or table as we observed in this BM-800 Condenser Microphone review. The ability to move around the table is quite versatile.

Frequency

The microphone has a frequency response range of 20Hz-20kHz, which was validated during testing – the microphone could pick up very high and low-frequency sounds – and sensitivity of -34dB 3dB.

The output impedance is 150/30 percent and is constant. Even when weak and without phantom power, the mic sounds nice. It picks up finer information that prior microphones have missed, and there is very little background noise.

Although the mic is not as soft as more expensive microphones, it still offers a good amount of depth and warmth for the price according to this BM-800 Condenser Microphone review. The results would be considerably better if you used a pre-amp.

Using with an amp

With condenser microphones, you will often want to purchase a microphone preamp like this one to give the full 48 volts to the microphone and get the most out of it. It is probably a good idea if you want to use this microphone for singing, music, or podcasting.

If you just use the microphone to chat with friends, we do not believe it is worth it to get a pre-amp only to make yourself sound better to them according to our BM-800 Condenser Microphone review.

Switches

Switches for controlling bass, pad, and attenuation are available on the microphone. If the microphone has more switches, you have more control over the sound it produces. Rolloff and attenuation controls are included, as well as a bass roll-off switch, a 15mV/Pa pre-attenuation switch, and a -10dB pad.

Applications

The BM 800 Microphone is ideal for both vocal and instrumental performances. As a result, it is practically an all-rounder microphone that is ideal for any sort of studio recording.

Built to Last

The microphone features a metal body made of Aluminum Alloy, making it both robust and dependable. It is also a lot of fun to hold in your hands according to this BM-800 Condenser Microphone review.

The BTSKY BM-800 performs admirably throughout the board. The microphone comes in a package with a shock-mounting bracket and a foam cover for the microphone itself.

The microphone’s body seems solid and long-lasting.

It will not come apart in a strong breeze. When it comes to looks, there are a few different variants to choose from, but they all have the same modest aesthetic. The anodized blue with silver accents is a nice touch.

Design

The BM 800 Condenser Microphone has a very premium design; the body appears to be made of aluminum, but the gold-plated mesh section is made of steel, as we discovered when we tested it with a magnet. It has a slight weight to it, which contributes to the overall premium build quality.

The BM-800 is a unidirectional microphone, which means you must aim it in the correct direction to make a good recording. It requires phantom power and connects to your audio interface through an XLR connection.

So be sure you have the proper gear before investing in this mic. There are other variants that use batteries and other options.

Conclusion: BM-800 Condenser Microphone [2023 Review]

This mic is, for all intents and purposes, a great bargain. While it is not the best condenser microphone on the market, it will meet or surpass the needs of the ordinary user according to this BM-800 Condenser Microphone review.

If you are not sold on the concept of studio quality or the added cost of a power supply, the battery-powered version could be a better fit. In any event, the BM-800 is a fantastic microphone at a low price.

It will provide if you pay attention to the specifics while buying. We hope you liked our BM-800 Condenser Microphone review and it was helpful.